Archives For Windows Vista
(Ed. Note: When I first posted this in 2009, I had no idea how popular it would become. For 2011, I’ve updated the content to reflect updates and new options in the market.) (Ed. Note 2: Thanks to Techradar for naming our Yule Log Visualization for Windows Media Player one of the Top 60 free apps for Windows at #4) (Ed. Note 3: In 2011, I replaced the FM Transmitter with the CZH-05B from Amazon.com. This is highly recommended over the C.Crane and is worth every penny.
Seeing as we don’t have a large yard to run a Mannheim Steamroller over our neighbors, I went with something a bit more subtle and easier to set up. The unexpected side effect is that kids throughout our neighborhood now think that Santa lives at our house! Here is the result: With a few tweaks, your community can be treated to music and a message from Santa via a low-power FM transmitter. All the details are below. Project ListTo create the effect yourself, here is what you need:
- A window. Just about any window will do.
- The Complete Virtual Santa Kit or an old Projector and PC. HD isn’t needed.
- An old DVD player with ability to set playback to repeat.
- A good FM Transmitter. I used a C. Crane Digital FM Transmitter but updated in 2011 to this one worth every penny for power)
- A white sheet to cover the window. Avoid patterns.
- Black Scrim used for theaters or a sheet of the black garden weed blocker fabric from local hardware store
Step 1: Set up the Virtual Santa Kit (or Projector) The Virtual Santa Kit includes everything you need for projection. If you’re going the homegrown route, I’m using an Optoma DS317 SVGA DLP Projector. It has a great throw ratio and at 2500 lumens should be bright enough for neighborhood outdoor movies during the summer. Don’t worry about fancy features- a standard-def projector will work with VGA input. The trick is to get one with 2000 lumens or better. Also look for ability to adjust keystone and reverse the image. I placed the setup on a small coffee table and made good use of the Windows 7 box to adjust the angle and do a quick alignment with the window: Step 2: Prep the PC (or DVD Player) As you can see above, I decided to use a PC instead of a DVD player. In this case, Windows 7 and Windows Media Player make an excellent choice if you’re going to change up your order, add custom music etc. I set up the projector via the included VGA cable and have extended Windows Media Player to run on the projector as a second display. You can set this by pressing [Windows Key] + P and choosing, “Extend” as seen below: Make sure Windows Media Player is set to run in full screen and move the mouse cursor back over to the main Windows display. This will set the player controls to hide automatically and has the added benefit of making sure any alerts/notifications will not appear on the projector. The last thing you want to do is ruin the illusion. Step 3: Prep the FM Tuner There are a number of FM tuning options available, however I strongly recommend against using a solution designed for in-car. They’re just not powerful enough. Be sure to read the comments on Amazon for the C. Crane Digital FM Transmitter and you should get tips on how to boostfor cars driving up to be able to hear your music. If you’re eagle eyed, you’ll notice below that I’ve soldered a dipole FM antenna wire to the transmitter to improve the distance. To figure out which station works best in your area, I recommend Belkin’s “My Best FM Stations” service. Just tap in your City/Zip/State and it will give you a number of options. Be sure to try these out yourself. Step 4: Create a Custom Movie with your custom Virtual Santa Santa’s Symphonies is available as a digital download (MPEG-4) which plays fine with Windows 7 and Windows Media Player. For Santa in the Window, there’s no music provided, but it’s easy to add your own – just use Handbrake to rip the DVD, add your favorite holiday music tracks with Windows Live Movie Maker or iMovie and save. You”ll also notice that I have shuffle and repeat turned on on WMP. Be sure to set repeat so the video can play indefinitely. With Windows 7, the system is so stable I’ve let it run for an entire week without issue. If you’re going the DVD route, burn a DVD with “loop” turned on via DVD Burner or iDVD. Step 5: Set up the Window “Screen” For the projection screen, I used a two-ply of a white sheet and the black scrim material as seen below. The scrim adds a great deal of realism to the effect because it blocks out the high intensity “halo” effect many projectors create and increases the black levels in the video. I just pinned up the scrim and the sheet behind it. Take this picture to your local fabric store and they’ll be able to set you up (thank to my wife for contributing to the effort <g>). Step 6: Fire up the projector, Create a Sign for the Yard and and delight the Kids Be sure to level and center the display. You’ll also want to adjust the distance from the window so the scale of Santa is correct. I use the WMP toolbar in full screen (seen below) to help center the video, then it automatically hides: Remember to move the mouse cursor back to the main screen Be sure to put a sign on the yard with the FM Frequency you’re transmitting on and house and you’re ready to go! Looking for more project ideas? Click the “Project” link at the top of the page. Happy Holidays everyone!
This year, Americans are projected to shell out over $5.8 billion dollars on Halloween, between a costume, candy and decorations. In our household, my wife really gets into Halloween costumes but for me it’s all about the opportunity to play junior Disney Imagineer with fun effects. Based on the feedback from last year’s Virtual Santa, this year I’ve created a new How To that shows how by using a few easily obtained items, you can build a cool Halloween effect sure to delight trick & treaters. Here’s a short video of the experience:
To create the effect yourself, here is what you need:
- A physical window. Just about any window will do.
- An old PC projector OR a TV large enough to place in front of the window. HD isn’t needed and you can pick these up cheap on eBay or Amazon.
- Hallowindow animations DVD or downloadable video files
- A Windows 7 PC to drive the video or an DVD player, blank DVD and Windows 7 DVD Maker
- Windows Live Essentials 2011 (free download)
- A good FM Transmitter or outdoor speaker. I used a C. Crane Digital FM Transmitter
- A white sheet to cover the window. Avoid patterns.
- Black Scrim used for theaters or a sheet of the black garden weed blocker fabric from local hardware store. Again, avoid patterns and logos.
Step 1: Set up the Projector
In my case, I’m using an Optoma DS317 SVGA DLP Projector. It has a great throw ratio and at 2500 lumens is bright enough for neighborhood outdoor movies during the summer. Don’t worry about fancy features- a standard-def projector will work with VGA input. The trick is to get one with 2000 lumens or better. Also look for ability to adjust keystone (angle) and reverse the image.
Step 2: Get the Hallowindow Animations
Hallowindow is a series of Halloween-themed audiovisual effects by Mark Gervais in Canada. It’s a great solution and he’s really upped the quality of the experiences over the past few years. You can order a reasonably priced DVD or purchase individual videos for download via PayPal for instant gratification and burn your own. I opted for download and burn which I describe below. You can also follow Hallowindow on Facebook where you can learn from other users of this visual effect.
Step 3: Prep the Video
Mark did a great job with Hallowindow and I have a number of his 4 editions. A number of the videos are decidedly creepy to the point that the little kids in our neighborhood and their parents may take issue. For this reason, I edited out the scariest parts a bit with Windows Live Movie Maker, a free download in Windows Live Essentials 2011. Just use the “Snip” tool to edit down the clips to just what you want. You can even add your own title sequence such as “Happy Halloween from the Alexanders” or similar. Have fun playing with the effects:
Then save the edited video in the recommended quality. This will create a video file that you can then burn to DVD:
Step 4: Burn the DVD with Windows 7 DVD Maker
Last year I used a Netbook which was great, but I’m simplifying with a burned DVD $99 DVD player. Windows 7 (and Windows Vista) come with a video DVD Burning tool called Windows DVD Maker. Just type DVD into the Start menu search box and you’ll find Windows DVD Maker:
Important Step: Before burning your DVD, be sure to choose “Options” in the lower right corner and set the DVD to play in a continuous loop. Most DVD players can do this from the remote control but some (like mine) keep the on-screen display on which ruins the effect. Set it like you see here:
If you are going to use a PC to drive video to the projector, make sure Windows Media Player is set to run in full screen and move the mouse cursor back over to the main Windows display. This will set the player controls to hide automatically and has the added benefit of making sure any alerts/notifications will not appear on the projector. The last thing you want to do is ruin the illusion.
Step 4: Prep the FM Tuner or outdoor speakers
There are a number of FM tuning options available, however I strongly recommend against using a solution designed for in-car. They’re just not powerful enough. Be sure to read the comments on Amazon for the C. Crane Digital FM Transmitter and you should get tips on how to boost for cars driving up to be able to hear your music. If you’re eagle eyed, you’ll notice below that I’ve soldered a dipole FM antenna wire to the transmitter to improve the distance.
To figure out which station works best in your area, I recommend Belkin’s “My Best FM Stations” service. Just tap in your City/Zip/State and it will give you a number of options. Be sure to try these out yourself.
Step 5: Set up the Window Screen
For the projection screen, I used a two-ply of a white sheet and the black scrim material as seen below. The scrim adds a great deal of realism to the effect because it blocks out the high intensity “halo” effect many projectors create and increases the black levels in the video. I just pinned up the scrim and the sheet behind it. Take this picture to your local fabric store and they’ll be able to set you up (thank to my wife for contributing to the effort <g>).
Be sure to avoid any wrinkles in the scrim or sheet. We used push pins on the edges of the window moulding to hold it in place and avoid unsightly holes:
Step 6: Fire up the projector, Create a Sign for the Yard and and get ready for Trick or Treaters
Be sure to level and center the display. You’ll also want to adjust the distance from the window so the scale is correct. Put a sign on the yard with the FM Frequency you’re transmitting on and house and you’re ready to go!
Happy Halloween everyone!
For years, industry pundits have claimed that Cablecard is dead. Cablecard, which enables consumers to get local and premium HD cable television programming directly into TV’s and Media Center PC’s via a digital cable tuner. It seemed poised to unlock consumers from the underpowered, much maligned cable boxes many rent from their cable provider and often loathe today. Yet the reality is there are only 443k 3rd party Cablecard devices in service (4 of those in my own house) and it’s clear the situation is going to get worse before it gets better. Now the new Genachowski-run FCC is stepping in:
New FCC Requests Comment on Video Device Innovation
As Sean Portnoy details in his writeup (with tip of the hat to Ars Technica’s deeper dive) there’s reason to pause and discuss as the FCC is asking for comment. I used to be a big supporter of Cablecard but am increasingly of the opinion they’re right. Cablecard has lacked mass adoption due to death by a thousand cuts, a bureaucratically devised solution to end a monopolistic stranglehold on innovation in the living room. The main reasons as I see it include:
- Cable never wanted it. The Cablecard requirement was foisted on the cable industry by the FCC as a part of the Telecommunications Act of 1996. They dragged their feet until the last possible moment when after many requested and approved delays over 11 years, on July 1, 2007 Cablecard went live.
- Set-Top Boxes are more Profitable when they’re Clunky. There’s a reason why the performance and graphics of your cable box look nearly the same over the past 15 years – in short their costs for each set-top have gone down astronomically while delivering effectively a 1990′s-level user experience. If you analyze SEC filings from major operators, you’ll find that their CapEx has actually reduced over the past 5 years thanks in part to cable box rental being a cash cow. The longer you can keep the hardware in-market, the more profitable it is.
- Not enough Competition to drive innovation. New entrants such as Verizon and AT&T offer more substantial capabilities as a means of differentiating their offering, but their main challenge today is footprint. It’s expensive to wire a new municipality with competing offerings. Some estimates put the costs as high as $600/household.
The Consumer Cablecard Experience
So what about the consumer experience today for Cablecard? How bad is it really? Admittedly the below in aggregate paints a worst-case scenario however roadblocks to consumer adoption abound:
- No Video On-Demand or Interactive Services. Cablecard finally started showing up about the same time large operators started rolling out their on-demand services which don’t work with Cablecard. By it’s nature, Cablecard is a one-way device and can’t talk to interactive services. Integrated services like Twitter and Facebook via your Cablecard are impossible.
- It’s Physical. Cablecard requires you have a credit-card sized unit plugged into your TV/TiVo/Tuner. First generation required one card per tuner. In many cases, you need a “truck roll” in order to get the hardware or go stand in a long line at your local cable office. Not customer-friendly.
- Few Supporting Devices. Until just recently, the qualifications required to get a device certified for Cablecard support were challenging. Take PCs for example – until just a few months ago, OEM Windows PCs had to be pre-certified as ready for Cablecard for the hardware to work until last month. As for HDTV sets, in the increasingly commoditized HDTV set industry, what manufacturer in their right mind would increase their costs and certification requirements by adding Cablecard tuner support?
- PC Cablecard certified Tuners are costly and hard to find. Because of the PC qualification restriction, even if you did have a qualifying PC, you had to know the right place to find a tuner – often on Sony or Dell’s site. The ATI Digital Cable Tuner product that is well known and respected (I use two) has apparently all but disappeared. Other Cablecard-certified PC tuners are hard to find- the most promising from a Kirkland, WA startup, Ceton won’t be available until 2010 and a 2-tuner offering likely around the $300 mark. No wonder there are only 14 3rd Party certified devices for Cablecard
- Setup is too Complicated. Setup requires you have possession of the physical card, you need to seat it in the device, call the cable provider, offering up a long series of IDs and wait for the data to download, sometimes up to an hour. Diagnostics require technical training on part of cable provider’s staff.
- Rental Fees. Cable operators introduced cablecards for free, then started charging a monthly rental fee. In some cases, the cost for two cable cards is comparable to the cost of renting an HD DVR from the cable operator.
The Future (and recommendations to the FCC)
And the future doesn’t appear to be much brighter. The interactive support needed for Video On Demand or Interactive services has been slow to materialize – July 1st 2009′s agreed-upon deadline came and went and Panasonic continues to be the only TV manufacturer to have support for the platform. Ok, so what if you don’t care about getting “Premium” channels such as HBO or Showtime and just want to record Discovery Channel or ESPN? More economical solutions such as the SiliconDust HDHomeRun (which I also really like) in many regions can now only pick up local TV signals. Here in the Seattle area, as of December 8th, all non-local stations are encrypted by Comcast. Reports are Verizon’s FioS will still let you tune but for how long? It’s clear concern among content providers over piracy of their unencrypted HD content is a top driver of this behavior.
So what would I do if I were at the FCC working through this issue? Here’s a quick scorecard cheat sheet for consumer perspective for starters:
|Platform||Supports||Top Pain Point|
|QAM/ATSC||Local Digital TV/HDTV channel tuning via Cable, no hardware required from Cable provider||Cable operators starting to encypt previously available cable channels
(e.g. ESPN, SyFy) with FCC approval
|Basic and Premium Stations
(e.g. HBO, Showtime) with hardware from your provider
|Complicated Setup & high cost product adoption; No VOD/Interactive features|
|Interactive Services with hardware from your provider||Delayed rollout, only one TV in-market supports;
No PC support
- Simplify the Offerings. The fact that these solutions are so confusing and hard to understand is a root issue – build one solution and market it.
- Drop the Cablecard Hardware Requirement. Strong encryption exists today in software. The need for a rented piece of hardware is a dinosaur in the age of online services such as Xbox LIVE.
- Incentivize operators to reboot and innovate. Today’s cable networks are a hodge-podge of mis-matched technology some have described as “Protection through Obfuscation”. Combined with the flurry of acquisitions through the 90′s and 00′s and you have today’s experience – mis-matched channel lineups and product offerings sometimes street by street. The faster the industry can move to a switched, all-IP infrastructure the better.
- Support Federated, Personalized Logins. In the online beta of Fancast Xfinity which launched yesterday, Comcast uses your Comcast.net email and password today, one per household. This limits options for personalized guide listings and integration with other federated services such as Twitter and Facebook. Architect the solution for today’s established and emerging consumption habits.
- Advocate a Multi-screen, Multi-location solution. The replacement should acknowledge the rightful place of multiple devices in consumption of services you’re already paying for – namely PC and mobile devices alongside your TV. Segregation based on screen size is no longer an option.
- Unify the Interactive platform with minimum UX/performance requirements. Blu-Ray discs, BDLive and tru2way all standardized on Java as middleware for the platform. While I won’t get into a debate over the merits of Java, my experience has been poor on BD players with excessively long load times and reports of immature designer/developer tools. Learn from BD and ensure the industry to make the same mistakes with Tru2way.
- Simplify Certification. The existing methods can certainly be improved. I won’t go into details here but have had enough conversations in the industry to know this is a hard problem exacerbated by many factors.
- Recognize need for Consumer Marketing. If consumers don’t know it exists, they won’t use it. The industry learned a lot from the DTV switchover earlier this year. Encourage an ecosystem to flourish.
There is no doubt these are hard problems with very smart people working on solutions. But from a consumer’s perspective, tru2way is lining up to look like more of the same for the next 15 years.
This is just one person’s opinion on the situation and my advice to the FCC. What do you think?
Ed. Note: Fixed table to reflect Cablecard+Tru2way middleware solution (thanks Dave).
Ed. Note 2: Updated Ceton product availability to 2010. (thanks Alexander).
If you know me, you know I can go a little Clark Griswold this time of year. I love the holidays and spreading a little Christmas cheer. So here are a few of my favorite downloads, dusted off and repackaged for Windows 7. With apologies to my friends in the southern hemisphere, I’m keeping the Winter Fun Pack naming convention . So this year I’m super-sizing my blog post on fun PC projects with features that are simplified by Windows 7. Please note that this is not an official release from Microsoft, rather something I like to do for fun. So here goes:
#1 NEW: Add a Winter Desktop Theme to Windows 7
This combination of Winter wallpapers and sound effects are sure to warm your heart and will be familiar to those who installed the Windows XP Winter Fun Pack back in 2003 as this is a re-release, simplified by Windows 7. I tried to take care not to overdo with the sound effects but you’ll find a few little additions I think you’ll enjoy. To install, just run the .themepack file on your Windows 7 desktop. The wallpapers are set to change every 30 minutes, but feel free to choose your own.
Download Winter Desktop Theme for Windows 7 via Skydrive (5MB):
#2 Add a Yule Log Visualization for Windows Media Player to Windows 7
This was one of my favorites and the good news is that it’s been tested and works great with Windows 7. Watch as the Yule log flares along to your favorite holiday music in Windows Media Player. A bit of trivia – we commissioned Frog Design to create this back in 2003, inspired by years of the 24 hour Yule Log on WPIX 11 in New York on Christmas Eve/Day. Little did we know then what a classic it would become.
Download Yule Log Viz for Windows Media Player via Skydrive (1.9MB)
#3 Quickly get to Holiday Autoplaylists with Windows 7
Another oldie but goodie – unzip these playlists to your default folder (e.g. My Music) and Windows Media Player will create playlists based on holiday music in your library. Not only good for finding the music based on common keywords, but also for removing those tracks from your library after the holidays. In music mixology, nothing is worse than “Jingle Bells” in the middle of a 4th of July party. You’ll find playlist selections including “All”, “Fresh Tracks” for music added in last 7 days, “One Audio CD Worth” and “One Data CD-R Worth” in the mix for holidays of multiple denominations. To install, just unzip into your My Music\Playlists folder.
Download WMP Holiday Autoplaylists via Skydrive (15.5KB)
#4: Create a Holiday Trivia Slideshow with Windows Media Center and Windows 7
A few years back, I built a pack of trivia questions as slideshow images that could be used as a slideshow on Xbox 360 or Windows Media Center. Organization is now simplified with the Slideshow creator built into the Windows 7 Media Center – Pictures feature – just pick your Pictures, add the trivia questions and music, and you’re set for your next holiday party. Trust me, friends will ask how you did it. You can learn more here at my original post.
Download Christmas Trivia Pack #1 (.zip, 3MB)
Except for the Desktop Theme, most if not all of the above should work on earlier versions (XP, Vista) but some of the features are easier/more intuitive on Windows 7. In the coming week, I’ll post additional clips here as well as my own How To for a cool Holiday outdoor display I’m doing this year created with Windows Live Movie Maker and powered by Windows 7.
If you like the Holiday add-ons, please let me know in comments here and tell your friends. Happy Holidays everyone!